毛竹周年采伐及经营管理配套技术研究

为满足现代竹材加工业生产周年供竹的需要，开展毛竹周年采伐及经营管理配套技术的研究。结果表明，在毛竹１个生理周期中，除每年３～５月和白露前后半个月外，其余１６个月可伐第４度毛竹，这对竹笋和竹材产量的影响不明显，可提高未来第２度竹竹笋的产量，实施周年采伐后，对竹材的抗拉、抗压强度最大下降７％，对竹制品的性能无明显影响；施尿素可提高经济产量，以每公顷施３００ｋｇ以上为好。实行周年采伐还必需加强林政管理，以杜绝乱砍乱伐现象发生。     

天然林直径分布的线性表达及其应用

利用非线性函数的线性化方法,使传统的天然林直径分布的反"J"型曲线转化为直线形式,并探讨了直线参数变化的直观表现。通过对长白山天然林123个固定试验地林分直径分布的线性拟合,平均相关系数为0.98,表明天然林的直径分布线性化表达是可行的。可利用参数设计择伐株数和预估采伐前后的直径分布。参数在天然林择伐作业设计中可操作性强,研究结果可以为天然林经营,特别是为择伐作业提供依据。     

Crop productivity under differently lopped canopies of multipurpose trees in Central Himalaya, India

Ficus species are multipurpose trees well known by rural populations in Sahelian and Sudanian zones of Africa. Their uses are well documented but their amenability for vegetative propagation has not been extensively studied. This paper compares the rooting ability of stem and aerial root cuttings from thirteen Ficus species found in West Africa. It highlights the differences between species belonging to the sub-genera Sycomorus and Urostigma. The former show no capacity to propagate from cuttings whereas the latter, with epiphytic development, can be propagated by cuttings, although this capacity varies among species. Thus, F. thonningii, F. leprieurii and F. ovata are easily propagated, while F. platyphylla and F. elasticoides are propagated with difficulty. The rooting capacity also varies depending on the cutting material used. It decreases in the following order: long leafless hardwood cuttings (pole) > nodal cuttings > apical cuttings. Rooting potential increases when the cuttings are harvested towards the end of the dry season(March to May). Aerial root can be used for cuttings in all species of the sub-genus Urostigma. The capacity of root cuttings to regenerate is greatest when cuttings are collected at the beginning of the dry season (November). In this case, wound-induced adventitious roots arise at the basal end of the cutting while de novo buds are developed from the cambium at the distal end. The subsequent morphological development is identical to that of a stem cutting. These results clarify and allow the optimal use of the knowledge and methods developed by the indigenous people of the Sahel and could assist and promote fig tree (Ficus sp.) domestication in the dry tropics.This revised version was published online in November 2005 with corrections to the Cover Date.     

Mass propagation method from the cutting of three dipterocarp species

We developed a vegetative propagation system for mass-producing three dipterocarps species,Shorea selanica Bl.,Shorea leprosula Mig., andShorea platyclados Sloot. This system uses fog evaporative cooling inside a greenhouse to reduce the leaf-to-air vapor pressure deficit (leaf-to-air VPD) inside the propagator, even under high irradiance conditions. This cooling method has no negative influence on medium conditions such as overwetting. A plastic tent propagator combined with this cooling method was used for vegetative propagation experiments. In mass-production experiments, the annual rooting percentages from the cuttings were low in the first 2 years (1997–1998) due to operational problems of the tent propagator (S. selanica, 48–51%;S. leprosula, 56–59%;S. platyclados: 50–63%). A hard cover propagator improved the rooting percentages in the mass-production experiments in 1999 because it made operations easier (S. selanica, 70%;S. leprosula, 77%;S. platyclados, 77%). This system, which uses a combination of fog evaporative cooling and a hard plastic propagator, should be useful for the mass propagation of these dipterocarp planting stocks. This study was carried out under a joint project of the Ministry of Forestry, Indonesia and Komatsu Ltd. The project was supported by Research Association for Reforestation of Tropical Forest (RETROF) organized by Japanese Forestry Agency.     

饲料型四倍体刺槐嫩枝扦插试验初报

根据四倍体刺槐自根能力弱的特点,利用其嫩枝进行全光喷雾扦插繁殖。在同等试验条件下,与匈牙利刺槐进行对比,经多种激素处理,结果表明:1 a生苗的嫩枝较2 a生苗的嫩枝易生根,匈牙利刺槐较四倍体刺槐易生根;用甘霖1号速蘸发根剂处理的效果最好,生根率可达60%~88%。     

福建山樱花扦插繁殖及其影响因子研究

在塑料拱棚下进行福建山樱花半木质化枝条扦插繁殖试验,分别进行了不同扦插繁殖时间、不同浓度的ABT1号和IBA处理、不同扦插基质和添加钙镁磷对生根促进剂提高福建山樱花扦插生根的影响试验及综合试验。结果表明,福建山樱花半木质化枝条扦插繁殖以冬末春初为适宜时期,以2份素沙+1份粘性黄土为扦插基质,插穗经IBA 2 500 mg.L-1+钙镁磷沾根I、BA 3 750 mg.L-1+钙镁磷沾根或IBA 5 000 mg.L-1浸泡处理均有良好的促进生根效果,平均插穗生根率和平均一级不定根数最高分别可达86.67%和4.68条。     

红叶石楠扦插育苗技术

在查阅有关文献和总结育苗经验的基础上,从苗圃地的选择与规划、采穗圃的营建及管理、扦插技术、苗木移栽及病虫害防治等方面总结了红叶石楠无性扦插育苗技术,为红叶石楠苗木的规模化生产提供参考。     

无卡轴旋切机变速进给模型与恒线速旋切运动轨迹模型的研究

详细分析了无卡轴旋切机的工作原理,推导了旋切过程中刀刃进给速度与圆木直径的数学模型,同时得出旋切时间的近似计算式。从中可知,旋切过程中刀刃进给速度必须按一定规律变化才能保证旋切机正常工作。建立了旋切机恒线速旋切的运动轨迹模型,推导出旋切机恒线速旋切时间的精确计算式,并在此基础上提出了旋切时间简便的近似计算式。这些研究结果均可用于指导设计和进行实际生产。     

国内主要针叶树种优树选择技术研究进展

总结了近10 a来国内主要针叶树种优树选择技术研究现状,当前国内优树选择主要应用了优势木对比法、生长量绝对值法和小样地法,对数量指标主要选择的是与材积量相关的因子,如树高年增长量和胸径年增长量。在此基础上对优树选择技术的发展进行了探讨并提出新的观点:①系统调查地理变异,兼顾遗传因素和环境因素,使选择指标定量化,用数理统计的方法进行选择;②对多用途树种应根据不同的育种目标分指标评价和选择,必要时也可再进行综合性选择多用途目标的优树。